D'Franco Painting & Wallpaper logo

Cost & Pricing

How many rolls of wallpaper do I need?

David and Daphne Cook, owners of D'Franco Painting and Wallpaper

David Cook

David Cook has run D'Franco Painting & Wallpaper in Huntley for 20+ years and has filmed more than a thousand videos on real jobs, so you can see the work before you pay for it.

Reviewed by David Cook · Last updated November 21, 2026 · 5 min read

How many rolls of wallpaper to order

Watch on YouTube

Don't go by the square footage printed on the roll. Count strips instead. Divide the width of your walls in inches by the width of the paper to get the number of strips. Add the pattern repeat to your wall height to get the length of each strip, then see how many full strips one roll gives you. Divide the strips you need by the strips per roll, round up, and order one extra roll.

The short version

  • "Covers 52 square feet" is true only if your walls were one long, flat sheet. They aren't.
  • Every strip has to be your wall height plus the pattern repeat. A 9 foot wall with a 2 foot repeat needs 11 foot strips.
  • Strips needed, divided by strips per roll, rounded up, is your roll count.
  • Don't subtract doors and windows. You still need full strips around them to keep the pattern going.
  • Always order one extra roll for defects, misprints and odd cuts.

Why the square footage on the roll is wrong

Every roll of wallpaper has a label: where it was made, whether it's prepasted or strippable, how wide it is, how long it is, and how many square feet it covers. Say it covers 52 square feet. If you unrolled it end to end on one giant flat wall, it would.

Your walls aren't like that. A lot of homes here in Huntley have 9 foot walls. If the paper has a 2 foot pattern repeat, every strip you hang has to be 11 feet long. If the roll is 28 to 30 feet long, you only get two full strips out of it. The rest is waste. On that wall, you throw away close to 30 percent of every roll, so the "52 square feet" on the label tells you almost nothing.

What changes how much paper you need

  • How big the room is
  • How wide and how long the roll is
  • What kind of wallpaper it is
  • The pattern repeat
  • How many obstacles there are: doors, windows, cabinets, vanities, shelving

Murals are different. A custom mural maker like Murals Your Way or Spoonflower prints the paper to your wall dimensions, so you give them your measurements instead of counting rolls. Everything below is for traditional rolls.

The strip count method

  1. Measure the width of each wall and add them up. Convert to inches.
  2. Divide by the width of the wallpaper. Round up. That's how many strips you need.
  3. Measure the wall height. With no pattern, the strip length is the wall height plus a few inches for trimming top and bottom.
  4. With a pattern, add the pattern repeat to the height. An 8 foot wall with a 2 foot repeat means 10 foot strips.
  5. Divide the roll length by the strip length and round down. A 30 foot roll with 10 foot strips gives you three strips.
  6. Divide the strips you need by the strips per roll, and round up. That's your roll count.
  7. Add one extra roll.

A worked example

Say the room needs 10 strips based on its width, and each roll gives you three strips. 10 divided by 3 is 3.3, so you need four rolls. Then order a fifth for safety.

That's the most precise way to order wallpaper, and it's how we figure every room we hang.

Why every roll cuts a little differently

The strip count isn't a guarantee, because of how paper is made. Manufacturers print huge runs, often 100 to 200 yards at a time, then spin it onto rolls and cut it at a set length. There's no rhyme or reason to where that cut lands in the pattern.

So one roll might start right at the top of the pattern, and the next might make you cut 8 inches in before the pattern lines up. On one odd room we got six strips out of one roll and four out of another.

Rolls can also have defects: a misprint, an ink smudge, a bad cut. That's another reason to order an extra roll. It's far easier to have one left over than to come up one short and find the next batch doesn't match.

Don't subtract doors and windows

It's tempting to take the door and window area out of your square footage. Don't. Even if only a few inches of a strip lands beside a door frame, you still need a full strip from top to bottom to keep the pattern repeat lined up around the room. Most of the time, a strip falls right over the middle of a door, leaving you a foot above it and a few inches on each side, and you still had to cut a full length to get there.

The same goes for a vanity with an open bottom or open shelving. If you can see the wall behind it, the pattern has to run all the way through.

Common questions

How do I calculate how many rolls of wallpaper I need?

Divide the total wall width in inches by the paper width to get your strip count. Add the pattern repeat to the wall height to get the strip length, figure how many strips one roll gives you, divide, round up, and add one roll.

Why doesn't the square footage on a wallpaper roll work?

Because it assumes no waste. Every strip has to be the wall height plus the pattern repeat, and whatever is left on the roll after the last full strip is usually too short to use.

Should I subtract windows and doors when ordering wallpaper?

No. You still need full length strips around them to keep the pattern lined up.

How many extra rolls of wallpaper should I order?

At least one. Rolls can have defects, and each roll can cut differently against the pattern.

How much does wallpaper installation cost?

Residential wallpaper installation has a $1,200 minimum that includes wall prep, priced by the job.

Not sure about your room?

Send us the room measurements and the wallpaper you're looking at, including the roll width, length and pattern repeat, through the contact page. We'll tell you how many rolls to order before you buy.

Your next step

Price your project yourself in about a minute. No form, no sales visit needed to see a number.

Read next

Comparisons

Paint vs. wallpaper for an accent wall

Paint or wallpaper for one accent wall? Here is how cost, durability and removal stack up so you pick right the first time.

6 min read

Problems

Do you install peel and stick wallpaper?

Do we hang peel and stick wallpaper in Huntley and the Fox Valley? Sometimes. What we install, what we turn down, and our $1,200 minimum with prep.

12 min read

Cost & Pricing

What wallpaper installation costs, and why installers are getting hard to find

Home wallpaper installation has a $1,200 minimum per job, wall prep included. Why good installers are scarce, and what a bad install looks like.

6 min read

Ask us anything

Still have a question?

Send it over and we will answer it. We answer questions publicly on this site, because if you are wondering it, someone else is wondering the same thing and nobody has told them straight.